#15393, "RE: Kickboat Crutch" In response to In response to 4 Thu Jun-12-03 06:17 PM by woodsac
Here ya go Dave. If you need more let me know.
(2) 3/4" X 1/2" PVC "T"
(2) 1/2" X 1/2" PVC "T"
(2) Quick Release Pins
(2) Clevis Pins w/ 1/4" washer on head side
(4) 1/2" Washers (for wheels)
(2) Cotter Pins
Approx. 72" of 1/4" Round Steel
Approx. 64" of 1/2" PVC
Place 3/4" "T" on foot rests. Drill 5/16" hole. Place clevis pin thru with a 1/4" washer at the head. Cut 2 pcs. pvc to the length you want. I used about 24" ea. Place inside "T" that is already attached. Drill hole thru "T" and pvc. Place quick release pin. Cut 2 pcs. of steel appr. 1/2" shorter then pvc. Place 1 ea. inside pvc. Attach 1/2" "T" with pvc glue. Cut 1 pc. pvc to fit between "T's". Glue if desired. Drill 1/8" hole in end of steel 1/4" from end. Put in cotter pin. Put on (1) 1/2" washer. Put on wheel. Put on (1) 1/2" washer. Place steel bar thru pvc. Put on (1) 1/2" washer. Put on wheel #2. Put on (1) 1/2" washer. (last one) Now mark to drill final 1/8" hole in steel bar for last cotter pin. Drill hole. Put in cotter pin.